Non Stop Autogate Rotating Issues and Repairs
Today, we helped a customer with their DNOR 712. The problem was that it kept rotating around and wouldn’t stop. This caused the arm to twist and break the wires connected to it. Lately, we’ve been getting a lot of enquiries from others who are also dealing with this issue. It seems like quite a few people are facing the same problem.
Have you encountered this issue before? If you’re experiencing this problem too, you can reach out to us at 012-405 8791. We’re here to help you with fixing it. We don’t just fix the autogate non stop rotating problem; we can also help with other issues related to autogates like replacing autogate rollers, fixing autogate bearings, repairing autogate remote controls, changing autogate battery, and repair auto gate arms.
Autogate Troubleshooting: Control Panel Issues and Remote Control Solutions
Upon checking we saw that the part of the control panel that should stop the gate arm from spinning isn’t working. So, the gate arm keeps on spinning until it twists the front bracket and makes a big hole in the gate frame. To fix this, we need to make sure the control panel can stop the gate arm like it’s supposed to. Then, we can think about fixing the broken front bracket and the hole in the gate frame to make the gate work right and look good again.
Lately, we’ve been getting service calls about problems with autogate remote controls not responding. If the push button at your house works but the remote control doesn’t, it’s likely that the autogate receiver isn’t working properly. To fix this, you’ll need to replace it with a new autogate remote control set. This set includes a 433MHz receiver and three remote controls.
Be careful because some autogate repair people might try to make you replace the whole autogate system or the control board, even if it’s not needed. You should get a second opinion if someone suggests these big and expensive changes. Often, a small fix or part replacement can solve the problem without spending a lot of money.
Best Swing Arm Model KRON 929
If your DNOR 712 has been working well for more than 8 years and you’re thinking about getting a new one, consider the KRON swing model KRON 929 or KRON folding autogate options. These are great choices known for being reliable and packed with useful features. Whether you go for the swing or folding type, you can expect a smooth transition to a new autogate that will make your property more secure and convenient.
Full Autogate Repair Services Across Klang Valley
We provide autogate repair services across Klang Valley: serving Taman Melawati, Wangsa Maju, KL, Ampang, Cheras, Kajang, Bangi, Semenyih, Kepong, Damansara, PJ, Subang, Kinrara, USJ, Puchong, Putraheight, Seri Kembangan, Shah Alam and More. If your area isn’t mentioned on the list, don’t worry. We actually cover many more locations; it’s just impossible to list them all individually. So, regardless of where you are, feel free to reach out to us at 012-405 8791 for our autogate services. For more information please visit our youtube channel https://www.youtube.com/watch?v=yuUIwWZydfk
