SERVICES
Our Autogate Services
We specialize in providing autogate repair services, including emergency auto gate repairs, for both residential and factory autogates. Our expertise extends to fixing various auto gate issues such as broken autogate arms, broken auto gate rollers, broken auto gate bearings, and faulty auto gate control panels, ensuring that your autogate is restored to full functionality. With readily available autogate parts, we can swiftly address any necessary auto gate replacements. If your automatic gate is experiencing issues such as not working, a jammed roller, uneven or slow opening of the autogate arm, auto gate opening only halfway, or a faulty auto gate remote control, it’s crucial to seek the assistance of a trusted autogate repair service near you promptly. For immediate autogate repair, please contact Mr. Sam at 012 – 405 8791.
At EE Automation, we take pride in our team of skilled autogate technicians who possess extensive knowledge and training in both Italy and local autogate repair standards. When you choose us, you can trust that your autogates will be handled by auto gate professionals who are well-versed in all aspects of automatic gate systems, including gate mechanisms and various auto gate parts. Our commitment is to deliver automatic gate repairs that meet the highest standards of quality and expertise.
Feel free to reach out to us for emergency automatic gate repair services. We are dedicated to providing prompt assistance and are ready to help. Please call Mr Sam now at 012 – 405 8791.
Common Autogate Repair Services
1. Folding Autogate Roller Off Track / Autogate Derail
If your folding autogate is off track or experiencing auto gate issues related to the auto gate rollers, EE Autogate offers reliable autogate off-track repair services. There are several factors that can cause the folding autogate to go off track/ auto gate derail, including a bent gate or worn auto gate rollers.
Bent Gate: Forced impact or wear can result in bending or misalignment of folding autogates. This uneven movement along the auto gate track can put pressure on the autogate bearings and accelerate wear.
Worn Rollers: Over time, folding autogate bearings can degrade, causing the gate to close more forcefully. You may also notice that your folding autogate only opens partially (halfway). When the rollers become worn, they can jam and drag along the track, leading to scratches on the track and make the auto gate to collapse.
Well, the autogate rollers are probably broken. It is advisable to have them replaced every few years. Continuing to use your autogate with broken rollers can place additional stress on other, more expensive components of the autogate system. By replacing the autogate rollers, we aim to prevent larger and more expensive problems in the future.
Do not attempt to repair the sliding gate yourself. They can pose a danger to you, your family, and the people around you because the autogate may collapse. So if you have a problem with your sliding autogate rollers, be sure to contact an autogate professional so they can fix it right away. We have the tools and equipment to lift up your sliding autogate. With nearly 30 years of experience in repairing sliding autogates, we have the expertise to ensure your gate is fixed promptly and effectively. Your safety is our top priority, and we are equipped to handle the complexities of sliding autogate repairs.
Have you experienced an issue where your automatic gate is sagging or auto gate fails to close properly, leaving a significant gap (several inches gap)? This is often caused by loose automatic gate bearings and hinges. If the gate sags and makes contact with the other side, it is necessary to replace the auto gate bearing. In case the hinge screw or hinge bearing is loose, replacing them will resolve the problem. It’s worth noting that gates can sag due to the weight pulling them away from the pillars. Worn bearings can also be a factor. Over time, the auto gate bearings can wear out, affecting the proper functioning of the autogate. In such cases, our team can address the issue by replacing the worn bearings. We have the expertise and necessary components to handle bearing replacements and ensure the smooth operation of your sliding autogate.
The autogate arm can experience various issues, such as breaking due to strong wind, impact from a car, somone forcefully opening it, ball screw wear, failure to retract, or a malfunctioning mini DC motor. We have the necessary auto gate spare parts and tools to fix autogate arm problems. Whether it’s automatic gate troubleshooting, replacing automatic gate parts, making automated gate adjustments, or addressing any autogate issues, we’ve got you covered.
Several factors can contribute to the disengagement of the gear rack and pinion gear in sliding autogate motors. These include issues like lack of lubrication, improper sliding gate motor installation, wear on the pinion gear and wear on the gear racks. When the gear rack fails to engage with the pinion gear of the sliding motor, your sliding autogate won’t move as it should.
Don’t worry, as we have all the necessary parts and accessories to repair your damaged AC sliding motor. If the pinion gear is cracked or if the problem is more severe, it might be necessary to replace the entire AC sliding autogate motor. Our experienced team specializes in troubleshooting and repairing all types of AC automatic sliding gates. With our prompt service, our autogate expert, Mr. Sam, will identify the issues and have your AC sliding autogate back up and running smoothly in no time.
First of all, ask yourself, how long have you been using the autogate system? It has reached its maximum lifespan if your autogate system is over 10 years old. The best course of action in this situation is to replace the entire autogate system. Otherwise, you’ll end up paying extra for regular repairs. Even the best autogate and the most expensive autogate have a limited lifespan. Sometimes existing autogate system has too much wear and tear problems to the point where they are not worth repairing anymore. Replacing your existing autogate is often cheaper and easier and less headache. Not every autogate installlers offer good quality autogate products. Sometimes your trusted autogate installer is too busy with his jobs and not be able to take your order and you will end up with low quality autogate systems. So don’t wait for it to stop working only you plan to replace the autogate system.
Whether you are planning to install a new auto gate or need to replace your existing gate opener urgently, you can rely on us. Leave the automatic gate installation to us. We have the technical know-how and skills to install the best autogate systems. Automatic gates plan an important role in controlling the entrance of your property. So you need to make sure that autogate is properly installed. Whatever your autogate needs, EE Autogate can provide a cost-effective and practical autogate solutions. Our FBM swing arm autogate is a weatherproof, heavy duty and user friendly autogate that offers reliable performance for a long time. So if you need to install a new autogate or replace an existing autogate, count on us. If you have the time, you may dropby our showroom (by appointment only), you can choose from a range of the best Autogate brands and top autogate models. We offer the best Autogate price for you. For a good quality swing arm autogate system, the price typically ranges from RM 1600 to RM 4500. While some models can be priced up to RM 6000, the average cost is around RM 1800. Keep in mind that the total cost of autogate installation will depend on the chosen auto gate brand and labour expenses.
When it comes to autogate installation, you should trust the Autogate experts. For any inquiries or to schedule an installation, please call Mr. Sam at 012 – 405 8791.
Your autogate automatically opens by itself? One of the most common and mysterious things that can happen to your autogate is for it to suddenly open on its own without anyone pressing the autogate remote control button. Most likely it is caused by short circuits in the autogate control panel. Major brands of autogate control panels/ autogate motherboards are available in our autogate service vehicle. We will inspect the autogate control panel and autogate transformer and fix any problems that may be affecting the autogate’s functionality. We will thoroughly test the auto gate multiple times to ensure that it is working properly. We understand that it can be frustrating when automatic gates fail to work, so we work quickly and efficiently to get the autogates working again.
Rest assured that the repairs will be carried out promptly by Malaysia’s most trusted auto gate repair company. To arrange a free consultation, please contact Mr. Sam at 012 – 405 8791.
If your autogate remote suddenly not working after a severe thunderstorm? Your remote control has been stolen? The first thing you should do is to press the push button on the wall. If it doesn’t work, the autogate control panel may have problems. However, if the autogate’s push button can be used to open it, then most probably your autogate remote’s receiver is faulty. To resolve this autogate remote issue, you can buy the autogate remote control set from us. Simply reach out to Mr Sam 012 – 405 8791, he will assist you.
If you’re unable to use your remote control, it could be for one of the following reasons:
Your autogate remote functions as a house key. This little yet crucial device can go missing easily. Losing your autogate remote control can be inconvenient and may leave you feeling insecure. If you’ve misplaced or had your remote control stolen, it’s important to take immediate action. Perhaps someone broke into your car and took your remote controls, or maybe you dropped your remote control somewhere else. DIP switch type remote controls are commonly used in autogates in Malaysia. To sync your remote control with the autogate receiver, you need to match the positions of the DIP switches. For instance, if switches 6, 7, and 8 are on in the receiver, your remote control should be set the same way.
If you need help with your autogate remote, please get in touch with Mr Sam on 012 – 405 8791.
Improper installation of a sliding autogate system can result in various issues, such as gate derailment or motor vibration. Common installation mistakes made by inexperienced individuals include improper gate alignment and installing autogate rails on uneven ground. These errors can lead to jerky operation, gate derailment, and accelerated wear of autogate components. Additionally, when constructing the concrete footing for the sliding auto gate opener FBM-3000, it is crucial to adhere to the specified size and utilize a stone mix with concrete cement. Following recommended practices, such as inserting a Y12 metal bar into the ground and creating a welded frame, will provide the necessary reinforcement and stability to prevent autogate motor vibration and premature wear of the pinion gear. In the event that you observe the auto gate wheels not rotating, it is essential to promptly replace them to prevent any additional damage to both the gate and the autogate motor. Non-rotating gate rollers can indicate various issues, such as worn-out bearings or damaged components. Continuing to operate the gate in this condition can lead to further strain on the motor and potential malfunctions. Therefore, it is crucial to address this problem without delay.
To rectify these problems, it is advisable to seek assistance from a professional autogate technician or contact Mr Sam at 012-405 8791.
EE Autogate offers autogate lock replacement and autogate repair services for all auto gates. If you’re experiencing issues with the locking mechanism of your autogate, our team of experts can assist you. We provide free autogate repair quotes and aim to fix the autogate lock issue promptly. We understand that many people may be experiencing issues with their Dcmoto GFM-925AL autogate lock, especially if the original installers are no longer available or unwilling to provide assistance. At EE Autogate company, we are here to help and offer our assistance in resolving the autogate lock problems you’re facing. Using an autogate lock is not recommended because the autogate’s track has the potential to sink or experience ground movement issues over time. Following ground movement, there is a possibility that your autogate lock may not properly engage with the latch. Gate misalignment can also cause the lock to out of the latch. The autogate lock occasionally experiences delays in releasing, leading to situations where the gate cannot open fully before the driver reverses the car and unintentionally causes damage to the autogate motor.
We also offer a variety of other auto gate services related to swing arm autogate, slidng autogate, dcmoto, dc sliding autogate, aluminium autogate, stainless autogate, trackless autogate system installation. Inquiry about our other factory autogate repair services today by calling 03 – 8062 5891
Automatic gates are very useful, but very annoying when they slowing down. There are many possible causes for this problem. It could be as simple as cleaning and lubricating your autogate with WD40. Dirty, dusty, crack, or sag autogate rails can also slow down the autogate. In many cases automatic gate rollers or autogate wheels can cause problems. Whatever the causes, you can quickly and efficiently repair slow moving automated gate.
Our professonal autogate expert Mr Sam and his technical engineers will diagnose the problems and provide the best solution. We will get your automatic gate running smoothly once again whether it needs cleaning, lubrication, or replacement of autogate parts. Another possible cause of an autogate slowing down is a power trip problem. When a power trip occurs, the autogate system switches to its backup battery power. However, the battery power is typically not as strong as the AC230V power supply, which can result in the autogate operating at a slower speed. If you experience a power trip, it’s advisable to restore the main power supply as soon as possible to ensure the autogate functions optimally. In addition, it is recommended to seek the assistance of a professional electrician who can perform a thorough check of your house’s electrical wiring using a multimeter. This will help identify any underlying electrical issues that may be causing the power trips and ensure the autogate operates at its intended speed.
Consulting a professional will help ensure the safety and proper functioning of your autogate system. I understand that customers may assume there is no problem with the electrical wiring if their house still has electricity and other home appliances are functioning. However, in the case of an autogate slowing down after a power trip, there can be specific issues related to the electrical wiring that may not affect the entire electrical system of the house. While other home appliances may still work fine, the autogate system could be experiencing voltage fluctuations or irregularities in the electrical circuit that are affecting its performance. These issues may not be immediately apparent without a thorough inspection using specialized equipment like a multimeter. Having a professional electrician perform a detailed check of the electrical wiring is recommended because they have the expertise and tools to identify any potential issues.
They can measure voltage levels, assess the integrity of connections, and ensure proper grounding, among other tests. This comprehensive evaluation will help determine if the electrical wiring is causing the autogate to slow down and allow for appropriate repairs or adjustments to be made. Taking this precautionary step will ensure the optimal performance and longevity of both the autogate system and the overall electrical infrastructure of the house. With our extensive experience of over 30 years, we have encountered numerous autogate wiring problems. It is not uncommon to come across issues caused by low-quality wires or improper wiring practices. Some electricians may use substandard wires, joints between leftover wires, or create excessive loops in the wiring.
Using low-quality wires can lead to various problems such as voltage drops, signal interference, and even wire degradation over time. Improperly joined wires can result in weak connections, leading to intermittent power supply or system malfunctions. Additionally, excessive looping of wires can introduce resistance and affect the overall efficiency of the autogate system. To ensure reliable and efficient autogate operation, it is crucial to engage experienced professionals who follow industry best practices and utilize high-quality materials. Properly installed and maintained wiring is essential for the optimal performance and longevity of the autogate system. Our team, with its extensive expertise, can diagnose and rectify any wiring issues, ensuring a safe and dependable autogate operation.
Note: When you receive quotations that are significantly below market price, it may seem too good to be true. They are many “hidden catches” you wouldn’t know until your electrical fails to work
If your autogate is damaged by a car, we understand that it can be a traumatic experience for you. And you want your autogate system to be back in working condition as soon as possible. If you are looking for the best autogate repairer, we are the autogate company to call. We are an autogate company that specializes in quick and efficient repairs. Autogate systems are usually damaged or bent in an accident such as hitting an autogate arm while reversing your car. It is important not to ignore this Autogate issue and continuing to use the Autogate system can affect and damage other Autogate components. In most cases, only the Autogate bracket needs be replaced. Whatever your Autogate problem, EE Autogate can try to solve it. So if your autogate is damaged or broken, call Mr. Sam immediately. 012 – 405 8791 to resolve issues quickly and efficiently.
Noone really thinks about or notices their autogate wires until they have problems. After that, it’s critical to have them repaired right away because you depend very much on your autogate to open and close your gate without you having to get down the car. Damaged wires or short-circuited cables are dangerous, it is safer to leave the autogate cable repair job to the autogate wire repair and autogate wire replacement expert in klang valley. Autogate wires are required for both sides of the pillars and autogate control panel. Every autogate wire does its job.
The autogate control panel draws its power from the incoming main power supply. The autogate system automatically switches between autogate batteries if a wire breaks. The autogate battery can be used to open and close the automatic gate until it is flat. We have seen thousands of cases where inexperienced or unethical wiremen resort to unprofessional practices, such as connecting autogate wiring with leftover cables or sharing cables with other household appliances like pillar lights, water pumps, or doorbells. These practices are highly improper and can lead to various issues and malfunctions. To ensure the proper functioning and safety of your autogate system, it is important to hire reputable and experienced professionals for autogate installation and autogate wiring. They will stick to industry standards and ensure that dedicated and appropriate wiring is used for the autogate, without compromising the integrity of other electrical systems in your home. Frequent tripping of the house’s electrical system due to the pillar light’s neutral wire is a concerning issue.
When the neutral wire of the pillar light causes the entire house’s electrical system to trip, it suggests a short circuit or an imbalance in the electrical load. This can be dangerous and may lead to further electrical issues or even pose a fire hazard.
The autogate wires are the “veins” of autogate operation and must be kept in good working order. If you notice a problem with your autogate wires, call Mr Sam immediately 012 – 405 8791.
Autogate factories in Malaysia usually use the thinnest material to make the gates. In order to offer competitive prices, they use the thinnest materials possible. Because customers are usually shopping around for the cheapest deals thinking they are getting the best deals in town. They are unaware that they are actually falling into the trap. We have firsthand knowledge of this issue as we receive many calls every day from customers seeking assistance. One common issue with autogates is when the autogate arm bracket becomes detached from the gate. Just give us a call, our experienced autogate repairer can reattach the autogate arm clevis securely to the gate, ensuring a strong and stable welding.
Additionally, rust may be present on various components including hinges, locks, bearings, rollers, and arm brackets, which is particularly common in Malaysia’s climate known for its quick rusting of steel materials
Our expertise extends to fixing a wide range of autogate problems. If you’re experiencing issues with your automatic gate, such as auto gate malfunctioning, auto gate slow operation, or auto gate unusual noises..
We offer a comprehensive list of services to address these autogate problems: broken autogate rollers, broken autogate hinges, autogate track replacement, rusted autogate, sagging autogates, broken autogate brackets
and autogate off track.
EE Autogate specializes in residential and factory autogate repair services. With years of experience in autogate repair have established us as a reliable and trustworthy autogate repairer. We understand that broken autogates can pose a safety risk, so we prioritize timely and efficient service to get your automated gates fully operational as soon as possible.
All types of autogates, including swing gates, sliding gates, and folding gates, can be repaired by our team of autogate experts and autogate technicians because they are very experience with the necessary tools and equipment. We carry large quantity of autogate spare parts in our vans and cars. We provide many different types of repairs, such as autogate track repair, autogate bearing replacement, hinge replacement, autogate roller replacement, automated gate repair and autogate welding service. Additionally, we offer preventative autogate maintenance services to keep your autogate in top condition and prevent problems in the future.
We provide many different types of repairs, such as autogate track repair, autogate bearing replacement, hinge replacement, autogate roller replacement, automated gate repair and autogate welding service. Additionally, we offer preventative autogate maintenance services to keep your autogate in top condition and prevent problems in the future.
We provide autogate repair and autogate installation in most klang valley areas such as Ampang, Ampang Hilir, Bandar Damai Perdana, Bandar Menjalara, Bandar Sri Damansara, Bandar Tasik Selatan, Bangsar, Bangsar South, Brickfields, Bukit Bintang, Bukit Jalil, Bukit Ledang, Bukit Tunku, Chan Sow Lin, Cheras, City Centre, Country Heights Damansara, Damansara, Damansara Heights, Desa Pandan, Desa ParkCity, Desa Petaling, Federal Hill, Gombak, Jalan Ipoh, Jalan Klang Lama, Jalan Kuching, Jalan Sultan Ismail, Jinjang, Kenny Hills, Kepong, Keramat, KL City, KL Sentral, KLCC, Kuchai Lama, Mid Valley City, Mont Kiara, Old Klang Road, OUG, Pandan Indah, Pandan Jaya, Pandan Perdana, Pantai, Pekan Batu, Puchong, Salak Selatan, Segambut, Sentul, Seputeh, Serdang, Setapak, Setiawangsa, Solaris Dutamas, Solaris Mont Kiara, Sri Hartamas, Sri Petaling, Sunway SPK, Sungai Besi, Sungai Penchala, Taman Desa, Taman Duta, Taman Melawati, Taman Tun Dr Ismail, Titiwangsa, Wangsa Maju.
Call Mr Sam now to get advice and an estimate at 012 – 405 8791
Take some photos and videos of the full gate as well as the left and right gates.
Send the photos and videos via WhatsApp and describe the issues you are having.
After hearing about your issues, we will set up an appointment with you.
We will make the necessary repairs at your home.
JOIN OUR NEWSLETTER
Get news & tutorials from EE Auto Gate
Copyright © 2024 EE Automation & Technology Sdn Bhd . All rights reserved.
